|
CIA | From reading on here, it looks to be possible to use the Iowa cors network to feed into a 252 receiver connected to a Pro600. I would like to do without the AgGps 900 radio and it's rtk tower setup. I run a laptop in the tractor, so Internet connection would be great. I see two modem options: an exterior cell modem, as shown at the Iowa RTN presentation, or a computer modem card. I can't find any information on where the signal would be fed into the 252 system - if this would go in up top where the radio was connected, or if there is a point in the cab to connect to on a 2008 Magnum? This would probably dictate which modem to use, based upon what type of physical connection is required. Also, I see references to using InTime software. Wouldn't GNNSS Internet Radio software be all that was needed to handle the signal? And which would be the preferred message format to use? A lot of questions, but the dealer is invested in a tower system.
| |
|