Near Intersection of I-35 & I-90 Southern Mn. | When the Insight powers down on its own does it just quit or go through a normal shutdown sequence as if you had pushed the power button? As you may be aware the Insight has two power connections, one should be constant hot and the other (optional) is key switched.
If the key switched power source is used, turning off the power to it is taken to be a signal that the operator has shut down the combine and wants the Insight to go through its normal shutdown procedure. THe Insight is actually running off of the constant source but the systems takes the switched source to act as a trigger to start the shutdown.
I never connected the optional power source since I wanted to shut it down when ending a session. I assume your are using your Integra with the same power cable so it would do the same thing so this is likely not the cause of your problem. |
AgLeader Insight powering down on its own
