|
Butterfield, MN | Yes, you definitely should be able to do this, but it doesn't look like Raven sells a kit for this. It must have been something that was factory available. What really confuses me about these is that they wouldn't have just tied into the left and right output pins on the single product node. All of those nodes have pins for turning sections 1 and 2 on and off with AccuBoom when on a granular product type without needing to get an AccuBoom node on the system. It works with the Viper Pro and does it all already. If you want to look into this possibility, check out pins 8 and 9 on the gray plug. 8 should go hot when the left side is to turn on, and 9 for the right side. | |
|
Raven experts?
