NEMO | swenzel - 12/7/2017 16:15
I reread and rethought about your original post.
If 2500 is connected directly to the display cable of Integra then my previous suggestions would apply.
If 2500 is connected directly to Intellislope (back on tile plow), I'm not really sure what to suggest.
I'm guessing you updated the Integra at some previous time via usb (say for planter or yield monitor). You are now connecting the Integra to Intellislope for first time since you last updated. The Integra will scan the can bus line and update any modules that need updating. In your case....it updated Intellislope I'm guessing.
2500 is directly on the plow.
Also tried to get Ontrak2 to work and it won't even recognize that module.
The satellite in upper left hand corner shows 10 satellites and shows GPS dif but is yellow not green like it should be. |