Near Intersection of I-35 & I-90 Southern Mn. | agr1333 - 11/30/2017 09:07
It more than likely wouldn't have a wheel angle sensor on it because the steer command kit comes with one. Those utilized a flow meter for wheel position. If you look under the cab by the steering motor you will see the valve. I could be mistaken but pretty sure all 70 series are autotrac ready.
You are probably correct. This brings up another thought, since SteerCommand uses their own wheel angle sensor, is there any problem with a rear wheel assist combine such as mine. My installer made a special bracket to put the wheel angle sensor on my 8120 with an ILS front end, since he didn't care for the one from Ag Leader. Would this be necessary for a combine with RWD? |
Would I be happy with an Ontrac 3 in my combine?
