|
Central WI | Running an integra on a NH TR99 for yield monitor. I can not get the header ht to display anything but 0 and lately its been turning the logging on and off on me. I went thru the head calibration for max and min, bu when setting max cut ht the display just shows 0% The header ht is on channel 4, elevator on channel 1. When I go in the diagnostics of the Flow module(iirc) I can watch the Header Raw number change as I change the head ht so it seems like the potentiometer is working and the Integra is getting the signal, just not processing t into anything. It just wont display correctly on the display or for setting max cut ht. What am I missing? | |
|