NE South Dakota Clark, SD | One other thing I have encountered with Trimble FMX and NAV 2 , so I do not know for sure if CNH does it the same way. Do not set the tractor as having an implement behind it. Set up as tractor only. It was projecting the exported GPS postion for the application point of the configuration that was in the display. In the case I ran into, this was 40 feet behind the tractor due to still being configured for an air seeder. Trimble claimed that they were only exporting terrain compensated position, but after we proved to them that they were not, they finally agreed with us. This was a couple years ago, so things may have changed. |
GPS Diagnostic Port on NH T8 series tractor
