|
Bancroft IA | I hate to keep beating a dead horse, but let's take it a step further. When using a CNH auto steer ready tractor but using a Trimble FMX or CFX750 as an AutoPilot controller still using the same diagnostic location back by the Nav. Is the NMEA coming out then still the corrected location of essentially where the Nav is? The receiver in this situation is the display and could be anywhere in the tractor and it has just a "dumb" antenna on the roof, but that antenna location is what we are putting in for the measurement in the AutoPilot setup. | |
|
GPS Diagnostic Port on NH T8 series tractor
