|
Lincoln, NE | Robert,
Is your Go app (general settings) set to "allow-multiple-flight-modes"?
If you are concerned about whether you made your update(s) properly - go to the general setting screen and page down to "About" and see what firmware is in the AC,RC, and camera.
Your "status screen" (on start-up) should also tell you if you are running current firmware - but check it anyway as described above in "About"
Above is based on Inspire AC settings - but your Phantom should be similar.
Edited by Old&Ugly 5/6/2016 07:18
| |
|