|
NC Kansas | http://www.fsmfg.com/chemical-processor.html
Check out this set up, it wasn't cheap I think $1,900 but is a very handy self contained unit. It's basically a turn-key set up, just need a few fitting and some 1" hose to hook up totes. Taller tank on the right is designed to suck out of totes using Venturi created vacuum. The shorter tank is a normal inductor. We have our susually set up to draw in our glyphosate from a tote, if you are adding other chems/surfactants/ams you can start putting them through the normal inductor. It a little tricky cause you can't necessarily induct other stuff while you are drawing in your glyphosate, but anything 400-500 gal for loads it works... If you are mixing a 300 gal load you have to be on the stick to make it work befor you end up with more water in the tank than you need. | |
|