Boog

If you're asking me (Ron..NE ILL..10/48) about frame-wheel-tipping, I'll answer. If you're asking Mike, I apologize for interfering.

Frame is not really meant to be transported around shop. Wheels would be much too small for easy rolling, as you point out, though the wheels far exceed the load capabilities. I simply put the wheels on there so I could pull the unit away from the wall for either service or "housecleaning".

The reel you see on the left side has 50' of hose. That will get us almost anywhere within shop to pump oil to engines. We don't normally park vehicles to be changed that far from oil supply. The hydraulic tank doesn't have a pump. I use a cone tank suspended from a roll-around hoist to add hyd oil when changed. I can hold 30 gal in the cone tank. Just works by gravity. That wouldn't cut it w/engines since many are way up in the air.