|
| TEDBEAR, i thought in a previous post on 11-24 about EZ Boom with NH3 that you responded to, was to leave the 171 number plugged into the insight meter cal b/c you only got on about 1/4 the amount you where looking for. I am having similiar problems with a DC NH3 Raven Accuflow system (one valve) (FC valve). The only way i could get the rate to stabilize was to plug in my 168 number that is on the flow meter. Using 16.8 was giving me very high values while in manual mode. Tried 71 (710/10) and still didn't have much luck. Any thoughts | |
|
Slow valves with DirectCommand and NH3
