Viewing a thread - Replacing concave in 9600

Forums | Classifieds (78) | Skins | Language

You are logged in as a guest. ( logon | register )

Replacing concave in 9600	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

sek farmer

Posted 7/15/2006 08:25 (#26735 - in reply to #26690)
Subject: RE: The concave was cracked and. plowboy

Have used St. John's bars and concaves for over 25 years and never had a problem. They have outlasted chrome bars by 30% or more. Can I use these folks for replacement parts on the rotor system of a 7860 and if so how are they performing compared to originals? Just traded for a rotary with 400 hrs and am a little aprehensive as to what the learning curve will entail. No more walker machines,,,,, don't know if that is bad or good.

Replacing concave in 9600 - DevinF : 7/14/2006 13:23
- I sent that crap back!!! - JK SCLA : 7/14/2006 13:38
  - RE: I sent that crap back!!! - Seppie : 7/14/2006 16:26
    - RE: I sent that crap back!!! - DevinF : 7/14/2006 17:00
  - RE: I sent that crap back!!! - plowboy : 7/14/2006 19:10
    - The concave was cracked and. plowboy - JK SCLA : 7/14/2006 19:33
      - RE: The concave was cracked and. plowboy - dave morgan : 7/14/2006 22:58
        
        RE: The concave was cracked and. plowboy - plowboy : 7/14/2006 23:38
        I quit bitching - Rich : 7/16/2006 00:17
        
        RE: I quit bitching - plowboy : 7/16/2006 16:20
        RE: I quit bitching, I doubt it! :) - dave morgan : 7/16/2006 19:19
        
        mu, mah, maa, maaaa, maaaa, massey Furguson....... - Guest : 7/17/2006 00:19
        
        RE: mu, mah, maa, maaaa, maaaa, massey Furguson....... - Doc Egor : 7/17/2006 09:08
      - RE: The concave was cracked and. plowboy - plowboy : 7/14/2006 23:36
        
        RE: The concave was cracked and. plowboy - sek farmer : 7/15/2006 08:25
        
        Re: Replacing concave in 9600 - pat-michigan : 7/15/2006 08:40
      - Reread, brought a laugh for some reason - plowboy : 7/15/2006 13:51
        
        RE: Reread, brought a laugh for some reason - plainsdrifter : 7/15/2006 14:03
        
        RE: Reread, brought a laugh for some reason - plowboy : 7/15/2006 14:47
        
        Re: Replacing concave in 9600 - Greywolf : 7/16/2006 07:13
  - RE:Lowen Concaves - Hop-a-long : 7/15/2006 14:02
    - RE:Lowen Concaves - plowboy : 7/15/2006 14:53
      - RE:Lowen Concaves - DevinF : 7/15/2006 18:30
    - RE: I was wrong. - Hop-a-long : 7/16/2006 21:42

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)