|
Eastern North Carolina | Larry, what oil do you use..? 15W40 synthetic, dino, etc..? I would pull the exhaust manifold and isolate the greasy exhaust port first, then move on from there. You may have one hole with a broken oil ring, high rpm the turbo boost keeps the oil down in the cylinder and burnt off. At idle it's pushing/pumping it out the exhaust. I figure excessive oil usage at 1 quart every 100 gallons of fuel used. Got much blowby...?
Edited by retento 4/27/2013 16:06
| |
|
turbo blowing oil out stack- part two
