Hagen Brothers farms,Goodrich ND | Some 6V to 12V conversions where the old 6V starter was retained, and the starter has the old Bendix inertia type drive, was that with 12V , the starter had enough extra power to break that cushion spring under the drive.
Replacing one or both of the big 6V cables with a skinny little 12V car type cables would reduce the starter power just enough to save that little spring from breaking, yet still start much better than the stock 6V system.
Edited by Jon Hagen 4/11/2007 19:00
|
8640 Deere has two 6V batteries
