|
| Obviously make adjustments from here to compensate for crop factors, but if you set it in the yard with these, you'll be in the ballpark:
Concave: 26 (fine tune for average cob diameter)
Cylinder speed: 350 (as corn dries incrementally slow speed to around 280)
Rotor speed: 450-500
Cleaning fan: maximum speed
Chaffer: 15 - adjust for sample cleanliness and/or shoe loss
Sieve: 15 - open if tailings is high
Disawning plates: Open
Feeder drum: Raised
Feeder speed: set according to ground speed
| |
|