|
roaming | each cal load weight needs to be within 5% of the others. If you used weights between 4k and 6k, that's a potential for being 30% off.
Most likely reason your Instant Moisture isn't changing is that the bypass auger isn't cycling as it should. There is an 5A inline fuse located at the bypass unit - check it. If it's blown, replace it, but also check to ensure that the bypass auger can turn freely and doesn't bind in the plastic block at the bottom end of the auger. If the fuse is good and the auger can turn freely, post back. | |
|
Question For Torn? Pro 600
