AgTalk Home
AgTalk Home
Search Forums | Classifieds (8) | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader aplication rate module
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 6/16/2022 09:45 (#9708062 - in reply to #9707919)
Subject: RE: Ag Leader aplication rate module


Southern Minnesota
Again I have no experience with your controller. With the Raven the Ag Leader sends the rate to the Rate 1 register. If using a VR map then that Rate could change. I did not use a VR map so my Rate 1 was always the same. Rate 2 or Manual was done on the Raven as before, the results and correct boom indications were done at all times.

I'm afraid I can't help you anymore since my experience with a Raven (which was very good) apparently doesn't apply to your situation. Good Luck. Hopefully some one else with your controller and setup will chime in.

I have not used the serial connection from a 440/450 to the Ag Leader Application Rate Module for some time as I use the Ag Leader Liquid Product Control module instead which controls the rate, maps correctly and most importantly has the ability to shut off the boom and/or planter in sections automatically.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)