|
se ne | Put up a 50'x50' shop last fall/winter. Had concrete finished smooth as could, knowing it was going to be painted, also wet cured it as much as possible for strength. I used Rustoleum industrial floor epoxy, put flakes in too. Real happy with it, might not have gotten it on thick enough in some spots but no chipping or flaking. Oil, water grease clean up well. Dropped drill finishing inside plenty of times and no chips. It can be a lot of work, having to etch (clean) the concrete and make sure it is clean as possible, then having to wait to cure. Overall glad I did it.
| |
|