|
Ea. Washington | Could be the rubber grommets with a little brass sleve in the headgasket. Several of them but I think I would try bars leak first and make sure overflow is open and maybe loosen radiator cap when puting in Bars leak at first. Can't hurt to try.Generaly end up with oil in the water because it is under more preassure unless the overflow tube is plugged. Also could be leaking o-rings on the sleeves. Sometimes Bars leak will work if the block isn't pitted too bad fron electrolisis, oops, didn't want to mention that. Good luck. Think I wouyld drop the oil just for good measure. | |
|