|
| TNX a lot! I think that I got the idea.
I was drilling winter wheat there today. Drove around my "turning area" with the AB-Line 1 on steering and mapped an exclusion zone.
Drilled the AB-Line 2 area of the field . See attached picture (very bad pic quality, but you can see the idea) : exclusion zone is blue and not drilled.
Then deleted the Exclusion zone features and started working the AB-Line 1 direction.
Still have to learn how to save these exclusion areas for future use but being able to not to use them when I don't want to.
And also have to learn to map an exclusion zone on this or that side on an implement (mine got mapped in the middle now...)
We do not need and make waterways on fields in my country. So this this was new to me.
The problem with all this learning is that when you are working on the fields you do not have a lot of extra time to try and learn these things as you most often just want to get it done within the available weather window...
 (IMG_20210905_202916 (full).jpg)
Attachments
----------------
 IMG_20210905_202916 (full).jpg (67KB - 68 downloads)
| |
|
Trimble FMX drill section control headland mode how to?
