Near Intersection of I-35 & I-90 Southern Mn. | Assuming the hydraulic and hoses are correct, think of the electrical like this: No electricity at the coil, the internal hydraulic plunger will be fully closed so no oil flow to the orbit motor. 12V to the coil, plunger should be fully open, maximum oil flow to the orbit motor.
With the Integra involved, it can send short pulses of 12V to the coil meaning the plunger will only open partway resulting in reduced oil flow and the orbit motor should turn at less than maximum speed.
Edited by tedbear 9/16/2022 06:31
|
PWM Hydraulic Drive-Tedbear?
