|
| We have a 7088, and power can be a problem in tough beans. We run a 35’ Macdonn head. Usually not to bad but have seen plenty of times, especially after dark, you coan put a full steady load on it pretty easy. Ours just turned 2000 sep hrs and has a hole worn in the bottom of the bin. Replaced the bin fill auger and tube 3 or 4 years ago with the extended wear, and I see the auger has a hole worn through the flighting at the top again. Had to rebuild the turret on the unload auger last year. We’ve had a lot more problems with the 7088 than the 2166 we had before it. | |
|
7088 vs 9760-9770?
