AgTalk Home
AgTalk Home
Search Forums | Classifieds (26) | Skins | Language
You are logged in as a guest. ( logon | register )

MF 11x5 Cab and 3pt Questions
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Next stop Valhalla
Posted 3/14/2019 20:54 (#7381091 - in reply to #7380808)
Subject: RE: MF 11x5 Cab and 3pt Questions


NE Neb
Cabs are roomy. Like 1155 said interior kit a good floor mat will kill most of the noise. If you want to take it farther then replace the fire wall insulation on out side of cab. Also under the foot pedal throttle put a piece of insulation on the under side of it. Where the aux. hyd hoses go out of the cab there's a foam piece there that needs replacing.
3 pt. sway blocks will keep the arms tight.
As the other poster said go drive one. Get used to using the multipower to keep the tractor from free wheeling. Other people complain about this alot but ive never had a problem with it. I can grab every gear from L1 to H3 and back down without using the clutch because it freewheels.
We're talking about 40 year old tractors but a 1100/05 series Massey are the best tractors they built. I was in my 1135 most of the day hauling manure. 20000+ hours on this machine. It's not pretty but I was warm dry and it's works and will be working 40 years from now to.
Edit.. 134 freon works ok but you've got to get good air flow across the codensor. There's foam at the bottom of radiator and on the sides between the radiator and side panels. Also foam on top between the hood. Everything has to be clean. I've added a small electric fan to the condenser on 2 of my 35s and it helps alot when running the engine at lower rpm. It gets air through it and that'll keep the high side pressure down and keep the air cold.

Edited by Next stop Valhalla 3/14/2019 21:05
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)