|
Sutherland, IA | Okay, well i'm sure now we have the "fast" style now. We do use the the 743 calibration for the "valve cal" which means we should have the fast valve. The control valve does use a 4 pole connector in which only 3 pins are used and the 3 wires are red,black, & white. My raven book does not give any description of the wiring schemes but if your's does could you tell me which wires i need to use? Thanks
As for the boom wiring, they are all wired into the liquid control module. We took off all the air operated boom valves and replaced them with electric raven valves. We also divided the 80ft. booms into 9 sections. | |
|
Direct Command wiring on rogator
