|
NW KS | I would push the correction data to a public caster to start with unless you are fairly familiar with networking and self hosted services. A Trimble FMX will work on 1004, 1006, and 1008 message. Add 1012 if you have GLONASS. 372 should be the same since it is a similar vintage product. Basically you need the GPS/GLONASS observations, base location, and antenna description. Use ADVNULLANTENNA as the antenna model as other have suggested. I use emlid caster over rtk2go. I think it is easier to get an account and setup with emlid and rtk2go has been known to have outages. | |
|
Mosaic x5 base station and ag372 wont communicate
