|
| I tried very hard to look for this specific info, but i am really bad at interpreting some of the data since i am only just starting to discover this world.
If i may, the problem is with my pro700 monitor and ag372 antenna not connecting to the base station set from the internal caster of the septentrio mosaic x5.
just recently purchased a used sierra gx450 modem, only now discovering that there were many better options, but this works fine for now and hope to rule it out. but i did have some double NAT carrier problems that i had to sort through reverse tunneling made by a friend who is a know-everything kind of guy and helped me a lot through this process, but he is also new in this sector and it was very hard for us to get started because of the specific terminology and unusual problems created by being run from a remote farm without acces to many internet based options so i was kind of limited to 4g SIM CARDS
What seems to be the problem, is that after many, many, many attempts to go through multiple combinations of RTCM messages, my ag372 still shows a “no base position” in the RDI menu
It will connect to the ntrip caster if i understand correctly from that menu, so the ip is found by the modem and connects to it, but it would not aquire DGPS signal and will not recognise my RTCM 1007/8 messages.
Currently i tried running mostly on simplified combinations, such as :
1004/1007/1008/1033/1230
1004/1008/1033
MSM4 (1074/1084) /1007/8(combined or single) /1033/1230
Etc etc etc, it just won’t connect and i start suspecting the modem for some reason, but i came across some info on the forum suggesting that casters from rtk2go to rtkdata and such, sometimes se rovers went with it, sometimes it did not, can you suggest something? Maybe it is an easy fix of an internal afs pro setup that can be done, or some modem setting of how it receives and interpretes rtcm or nmea?
 (IMG_5747 (full).jpeg)
 (IMG_5705 (full).jpeg)
 (IMG_5708 (full).jpeg)
 (IMG_5704 (full).jpeg)
Attachments
----------------
 IMG_5747 (full).jpeg (91KB - 35 downloads)
IMG_5705 (full).jpeg (110KB - 36 downloads)
IMG_5708 (full).jpeg (117KB - 30 downloads)
IMG_5704 (full).jpeg (130KB - 29 downloads)
| |
|
Mosaic x5 base station and ag372 wont communicate
