|
| i've pretty much tried every combination under the sun and it just won't get a fix, i am thinking maybe i should make the base without the Antenna Calibration files and see if it recognize the base position this way.
Last time i think i tried 1006/1008/1033/1074/1084 after trying the same just 1004 instead of MSM4 (1074/1084 specifically).
I Surveyed in my antenna for about an hour for a test, used a PPP service for this, after that i made i think a 12 hour survey that i am still yet to download and try again, but i hardly think the problem is some centimeters left or right from the exact antena position.
My last resorts for tomorrow's next testing are to basically select another antenna from the list instead of the one i have which is the ArduSimple Calibrated Survey GNSS Tripleband + L-band antenna
Maybe i screwed my RTCM intervals? any tips?
I also sniffed my local CASE DEALER RTK STATION and got what messages they send and tried to replicate their exact message and interval times, but could not apply everything they do as i did not have all of them in my menu. No Fix.
Also i set the refference id for the base as 100, maybe it's not a good number ? should i maybe try another refference id? | |
|
Mosaic x5 base station and ag372 wont communicate
