Near Intersection of I-35 & I-90 Southern Mn. | It appears that is your problem.
Check the control valve type selection in the setup menus. Since you are getting a constant 12V, this leads me to suspect that you have the control valve choice set incorrectly. It may be set to PWM which would not be correct for a Raven butterfly type valve. Again a picture would be most helpful.
Here's how I post pictures. I take a picture or two with my phone. I email them to myself. I read the email from myself on my office computer and download and save the picture. I can then add the pictures to my posts and replies using the office computer quite easily.
I used to be able to use a data cable to get the pictures from the phone to the office computer but something has changed and emailing to myself seems about as easy. |
Field IQ Rate
