|
E.C. MI | Displays in cab says have full agitation but happened to look in tank today with low water level while filling and there is nothing coming from the bottom agitators. I took electric valve off the plumbing that controls those agitator fittings and they seem fine, even manually turned the valve and tried again but still no agitation... could it be that the pressure sensor at the front of the tank that is plumbed into that agitator fitting is bad ( always seems to display same pressure as boom pressure ) thus not sending signal to accumulator valve that I want more or less agitation ( cause it thinks it already is ). Can’t seem to make agitation display read anything different from boom pressure while adjusting agitation with toggle switch in cab...anyone ever run into this and what was the fix? | |
|
No tank agitation on 2015 Hagie sts 12
