|
sw wisconsin | have a handler 2 plumbed in after the water pump, my question is how do I calibrate this meter that is pulling out of totes without running water through it to suck from the totes. I was thinking of measuring out 3 or 4 gallons and putting in a bucket then just sticking the hose that is hook to the tote in to the bucket to calibrate and just run in to the sprayer tank. will this be an accurate way to calibrate or will the suction be different from the bucket compared to the tote. First time using this setup and just not sure if this is the right way to do it. Just wondering if someone can tell me if this will work. Thanks | |
|