|
Elizabethtown,KY | Back when I had a 7810 I ran the vac off power beyond, I put a ball valve in the pressure hose right behind the male fitting that plugged into the pb and just slowly turned it off to coast the vac motor to a stop when traveling on the road. The ball valve I used came off the reel drive on a 900 series flex head.
I had the block with a needle valve with thumb screw adjust plumbed into my pressure hose for the vac and adjusted the vac pressure with it.
Edited by Red/Green 3/5/2015 08:04
| |
|