Posted 12/21/2014 16:58 (#4255523 - in reply to #4255399) Subject: RE: why use right angle gearboxes for swing auger?
North End I-15
My first Westfield used a Hyd motor on the swing 10X15', didn't have a tractor with good enough hyd to run the swing . Finally hooked the tractors loader hydraulics to run it . The new 10x61's all had the 2 right angle gear boxes and my old AC wd45 ran then well . Had enough hydraulics' to raise and lower auger .
Edited the dyslexic 10x16 to 10 x61 :>)