|
Jonesville, Mi | I would try recalibrating your head to the machine and turning the automatic control down. Last year I had the same problem your having and when I recalibrating I had to adjust the right side sensor because it was out of adjustment. My automatic control is probably 40% up and manual is close to that as well. Hydra flex pressure is running 1300ish. I know if you have this number way low, 8-900 it pushes hard on the ground and doesn't like to move as quickly as it should. | |
|
9560 with 625F Hydraflex header. Sluggish feederhouse response
