|
northern IL | Most all of my gates have two strands across them with a handle on each end. I first used smooth wire wich was hard to see, and would get kinks in it . Then we went to slinky gates. I liked them until the ends started to uncoil from the handles, and when you get two slinkies coiled together its a real pain. Now I use electric rope, and i love them. There really visable , no kinks , and they don't coil up with the other gate. The problem I found out with them is the connection between the rope and the handle corrode with rust and they loose connection . Can you put something in the connection to keep it from corroding or is there a special handle to hook to these? Checking fences tonight and we found three gates that all lost connection shutting off the fence to the rest of the pasture.
Edited by jc1206 8/28/2016 22:33
 (14724403156640.jpg)
 (14724403381931.jpg)
 (14724406826460.jpg)
Attachments
----------------
 14724403156640.jpg (71KB - 114 downloads)
14724403381931.jpg (138KB - 111 downloads)
14724406826460.jpg (103KB - 117 downloads)
| |
|
What do you use for a electric fence gate?
