Near Intersection of I-35 & I-90 Southern Mn. | Here is the code I need to type into my InCommand 1200 with Steer Command and GPS 6500.
RADARCONFIG ENABLE 36.11 5HZ 500 5
SAVECONFIG
I need to type this in on the bottom of the GPS screen on my InCommands. The first line needs to be capitalized and spaced exactly as shown. Spelling, capitals and spacing must be exact. The Compass may be different.
The second line is what "saves" it for future use. If I just type in the first line I get the speed out as desired but it goes away after I shut things down. By typing the second line after the first line, the setup remains in effect until a GPS update is performed. Then I need to enter it again.
I do not know if the above code is necessary or appropriate for your Compass. Some of the older Micro Trak products required an external device to slow down the incoming speed signal. I do not know if such would be necessary. I do not know what the 36.11, the 500 and the 5 actually do but this works for my systems. |