AgTalk Home
AgTalk Home
Search Forums | Classifieds (117) | Skins | Language
You are logged in as a guest. ( logon | register )

RTCM v3 data into a Trimble 372. How?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 4/5/2021 20:32 (#8935508)
Subject: RTCM v3 data into a Trimble 372. How?

Cedar Rapids, Iowa
I have a NovAtel base station sending RTCM v3 correction data to Ag Leader rovers using Satel 450 MHz radios. I want to use a Pro 700 and 372 on the same base station. I have a Satel radio connected to the 372 via port C. Baud rates are the same on port C and the radio.

I can't figure out how to configure the receiver to accept RTCM v3 correction data on port C.

I configured the Pro 700 to use a correction type of RTK, then went into the RDI menu to configure the receiver. The receiver status is saying D/3D. Correction age is bouncing from 2-4 seconds, but that doesn't change when I disconnect the radio. As for the incoming data type on port C, do I need to set that to RTCM, RTKLNK, or something else? What am I missing?
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)