|
Cedar Rapids, Iowa | I have a NovAtel base station sending RTCM v3 correction data to Ag Leader rovers using Satel 450 MHz radios. I want to use a Pro 700 and 372 on the same base station. I have a Satel radio connected to the 372 via port C. Baud rates are the same on port C and the radio.
I can't figure out how to configure the receiver to accept RTCM v3 correction data on port C.
I configured the Pro 700 to use a correction type of RTK, then went into the RDI menu to configure the receiver. The receiver status is saying D/3D. Correction age is bouncing from 2-4 seconds, but that doesn't change when I disconnect the radio. As for the incoming data type on port C, do I need to set that to RTCM, RTKLNK, or something else? What am I missing? | |
|
RTCM v3 data into a Trimble 372. How?
