|
North Carolina | On tractor house.com there are several going for 60k to 70k with 5 & 6 thousand hours. Thats about the price I see around here in NC when guys trade in their old MX's with 6 & 8 thousand hours on them. But 1750 hr, theres guys who would probable pay 80 or 90k for that tractor. Your 8940 is worth a nice sum, thats a popular series like the 7200s,
If you want to get into strip till you should think about auto steer. Move up to a 2013 ish or newer Magnum with the auto steer electronics factory installed already in them, electric remotes and front suspension. Night and day difference between bouncing around all day operating a tractor with lever remotes and a steering wheel vs front suspension, elec remotes, and auto steer. Shop around on tractor house or randall brothers in ohio and you can snag a good 1 for 100k to 150k with anywhere from 500hr to 1500hr sometimes with factory warranty still going. I grabbed a couple 2013's; 225cvt and a 210 to replace my puma200 and mxm190 few years ago and love them. Mid magnums 180 to 240 weigh about 23k lb depending on weight rack and wheel weight 160 to 205 pto; 250mag and up weight 28k and little more depending on weight package 205 pto and up. Remember you need weight to go with hp if your strip tilling | |
|
What's it worth? 2000 MX270
