|
| Hey Guys,
We have a Bestway 1200 Field Pro 3 Sprayer. I read in the operators Manual when you are using the inducter to mix chemicals that you need to adjust the sparge Valve to 60 PSI when it is running. I tried this today and the pressure would just go to 25 PSI and would not go any higher. I know the pressure guage is working good. I was wondering if any of you guys would have any ideas on what I should check?
Thank You,
JD105404T
 (Screenshot_20210228-172632_Drive (full).jpg)
 (Screenshot_20210228-172645_Drive (full).jpg)
 (Screenshot_20210228-172700_Drive (full).jpg)
 (Screenshot_20210228-212910_Office Mobile (full).jpg)
Attachments
----------------
 Screenshot_20210228-172632_Drive (full).jpg (176KB - 12 downloads)
Screenshot_20210228-172645_Drive (full).jpg (184KB - 15 downloads)
Screenshot_20210228-172700_Drive (full).jpg (113KB - 8 downloads)
Screenshot_20210228-212910_Office Mobile (full).jpg (169KB - 9 downloads)
| |
|
Bestway Sprayer Sparge Valve Question
