|
West Central MN | Had the same problem the other morning. Started the tractor (252 receiver, Pro600, OmnistarHP) and the monitor could not recognize the HP setting. Only option for GPS was Autonomous.
Messed around with it a while myself and finally called the local GPS guru. Spent over half an hour on the phone trying everything he could think of. Doing a soft reset on the monitor did nothing. Unplugging the 252 receiver and powering it back up again did nothing.
Finally found that by starting the tractor up with the Pro600 unplugged, then plugging it back in would solve the GPS problem and has worked great since. | |
|
Pro 600 & GPS Problems
