|
| Are you referring to a cultimulcher that has rollers front & rear & tine teeth in between or a single roller? We have a 36" Brillion X Fold single roller. Never had the rollers off but they all appear to have th same size hub. Years ago I purchased a new Brillion cultimulcher new but knocked down & put it together my self. Axle tubesd for the rollers was same diameter from end to end.
Only issue I see you might run into is the outer end of the axle tube is made so the carrier that bolts to the frame has a 1" axle welded to it that goes into a square sleeve that is welded into the end of the axle tube. At least that's the way any cultimulcher was I've been around | |
|