AgTalk is committed to operating without commercial advertising. Our fall donation drive is now open.

AgTalk Home
AgTalk Home
Search Forums | Classifieds (6) | Skins | Language
You are logged in as a guest. ( logon | register )

Controlling RowCommand with FieldIQ
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
co2shaun
Posted 10/15/2020 10:09 (#8546997 - in reply to #8546359)
Subject: RE: Controlling RowCommand with FieldIQ


NW KS
You would be adding row command to an older planter that doesn't currently have row command or the wiring? I believe you would just need a custom wiring harness to go from the field iq module to the row command clutch. As far as I know row command uses a 12 volt signal to turn the clutch off. One field iq module will do 12 sections. You can add more modules if you need more section or tie rows together. I believe you just need to get the 12 volt out put from the field iq module section plug to the row command clutch. Trimble may have a part number to do what you are wanting but if they do I don't know it. Ag express has some custom section control modules listed for field iq but they are showing them for nh3. They could probably hook you up with one.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)