|
N IL | Yes, I was. It wouldn't go below 1000 in either '2' or '3' on the joystick...talked to JD service manager, he said it was likely the pressure sensor. I changed it(even though it was acting like it was working), which drained the system and took all the pressure off. Then I calibrated the head immediately without a problem. Don't think it was the sensor because I still can't get it below 1000, I think it was because the pressure was off the system...but mission accomplished. The head worked much better, but in the back of my mind I feel I 'tricked it' into calibrating.
If anyone knows what is going on, please let me know. | |
|
JD 640FD: fixed mouse damage, still won't calibrate: cutterbar pressure too high
