AgTalk Home
AgTalk Home
Search Forums | Classifieds (17) | Skins | Language
You are logged in as a guest. ( logon | register )

Mac don draper head
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
DoubleJFarmsWA
Posted 9/16/2020 20:43 (#8499637 - in reply to #8499202)
Subject: RE: Mac don draper head


Eastern Washington
You don’t say which model..

I have 36 foot Macdon 974’s... smile is center low and sides up (which is what u are wanting), frown is center high and wings low... to test on 974, you put 6in blocks under center skids and lower header, ends should touch the ground, this is full frown... to chk smile, put the 6in blocks out under the divider skid plate.. lower down, the center should touch the ground, this is full smile... if it doesn’t do that u adjust... on steep draws, we run up the side on both edges, with the end divider running in the bottom of the draw, works well.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)