Near Intersection of I-35 & I-90 Southern Mn. | Yes, that should be fine. The setup procedure that they mention uses the Integra to make changes in the GPS 6000. It does not make any changes in the Integra.
This may not even be necessary for you as the 6000 may be just fine the way it is. The 1500 should continue to work as in the past. Upon startup, the Integra does its best to "mate up" with the settings from the GPS. The procedure can be necessary if the 6000 were to be used with an older Ag Leader display. If the 6000 is used and had been "numbed down" by the previous owner, it might be useful to reset it to the output suggested. I suspect you will be fine doing nothing.
This should be a one time deal for you.
I am in a similar situation. My InCommand 1200 is used in a tractor with an Ag Leader 6500 for steering and application control. During harvest that InCommand is moved to the combine which has an older Raven Phoenix 200 GPS on it. I do not need to make any changes. The old Phoenix was used with an Insight and now with an InCommand.
Edited by tedbear 9/5/2020 06:18
|
Ag Leader Integra used with 2 different globes
