|
| Your KPM II runs the muxbus can based seed tube sensor system. So these sensors are not compatible with Trimble Field IQ.
A couple options you can change the sensors to Dickey John hi rate and get a new seed tube sensor harness from Trimble or Ag Express. We have done a few Kinze's this way and works well. With the 750 it works but screen gets pretty busy. Down the road if you ever want to control a product like fertilizer and seed you have a limitation of being able to control two products. Can be lacking if want to do liquid 2x2 and control a popup in furrow. May not be on the horizon but something worth considering before you decide.
Another option that can read the Kinze Muxbus is an Ag Leader screen Integra, older Insight or new InCommand 1200 would be compatible with the KPM II harnessing with adding the Ag Leader module for Kinze muxbus. You could do everything on the Integra or Incommand or you could feed GPS from your 750 into Ag Leader screen. We have a few planters running on the 1200 and with split screen option makes it really nice to plant with and log data with varieties. Then down the road with InCommand 1200 you would have option of electric drive and or down force.
If your looking to get to one monitor the above suggestion may not be the best fit but an option you have. Good luck with your planter.
| |
|
CFX 750 and Kinze 3600
