|
| Just making sure I am understanding. You are running over corn while spraying on WAAS and driving manually? Or are your marriage rows off between planter passes and you are seeing that while spraying or side dressing and that has your tram lines slightly off?
Manually driving if that is the case can't help there.
True repeatability comes from running RTK in both machines and loading your planting guidance lines into your sprayer so that you are steering at the same exact degree heading as when you planted. Not sure about being able to import guidance lines into raven monitor from trimble. A software program like SMS or trimble ag software would be needed to help this. With RTK and your implement widths matching up you "should" only have to do this once because of the ability to use the same guidance line over again.
How do you shut your row units off to make the tramlines?
I have customers planting 6 rows and have a 12 row liquid knifer for nitrogen load the same line in field and it will give 1 guidance line for every two planter passes, AB lines, the key is then at the same degree heading while running steering.
Wanted to ask some follow up questions to try and understand better where your issue may be. | |
|
Tram Lines in 15" corn with RTK Cellular Modem
