Near Intersection of I-35 & I-90 Southern Mn. | Do a search here for Ag Leader Strip Till module. There were a few used ones available but this was back in time.
It can handle one to three products as I recall. I believe Product 1 can be seed or fertilizer. You would need an auxiliary input module and switch in the tractor or the SC110 CAN switch box. The Strip till module is also needed and usually would be mounted on the applicator. It can control a PWM or Servo hydraulic valve. You would also need a shaft encoder to inform the system how fast the metering device is turning. A calibration number is used to convert the shaft RPM to the amount of seed being delivered. An implement switch may be useful.
Even without the modules, you can create a strip till configuration on your Integra. This would give you an idea of what is involved. Of course, if you tried to use the configuration, it would fail since it could not find the modules that are needed.
Edited by tedbear 8/26/2020 12:47
|