|
Butterfield, MN | Let's see if we can make sense out of this then. It looks like the pins on the Raven side heading out to the boom valves for booms 1 and 8 should get shifted so they correspond with the left and right fence row pins on the Case side to make everything work. Since sections 2-7 are still working correctly, those don't need to get moved at all. The confusing thing is that the pins for the fence row nozzles will already be populated on the Raven side, since they would have connected straight through from the other Case plug rather than going through the AccuBoom node. These can either be populated back into the pin locations of the pins being taken out and moved, since they don't actually connect to anything real on the other side, or you could just tape them off so they don't short against anything. | |
|
Raven Accuboom not shutting off section 1 and 8
